Flare Recovery Data Request Questionnaire

For recovery of very low pressure gas using either high pressure liquid or high pressure gas.

Contact Name	*
Company	*
Email	*
Tel
Fax
Application location/country
Please quote the relevant production conditions (with appropriate units) for a free initial evaluation.
* denotes a required field, other fields are optional at this stage
A. High Pressure flow available at eductor inlet
DATA UNITS 1. Operating pressure * psig psia bara barg 2. Gas flow rate * MMscf/d Sm3/d 3. Total liquid (oil + water) flowrate * bbl/d m3/d 4. Operating temperature   Celsius Fahrenheit 5. Gas specific constant or molecular weight     J/kgK 6. Specific heat ratio     Cp/Cv 7. Total liquid (oil + water) density   kg/m³ 8. Pipe inside diameter   inch mm 9. Sand Production if any   lb/1000bbl kg/m³
B. Low Pressure flow available at the eductor inlet
1. Operating pressure * psig psia barg bara 2. Gas flow rate * MMscf/d Sm3/d 3. Operating temperature   Celsius Fahrenheit 4. Gas specific constant or molecular weight     J/kgK 5. Specific heat ratio     Cp/Cv 6. Pipe inside diameter   inch mm 7. Sand Production if any   lb/1000bbl kg/m³
C. Exit flow conditions at the eductor outlet
1. Required discharge pressure * psig psia bara barg 2. Pipe inside diameter   inch mm
D. Any other system constraints, targets or comments
Captcha * Please enter the letters and numbers you see displayed in the above image (What is a CAPTCHA?).