Gas Production Boosting Data Request Questionnaire

Our Production Boosting Guide (which can be downloaded here) can be read in conjunction with our questionnaire, which is a means to allow us to understand, which installations and wells, may offer the best opportunities initially, to generate additional revenue for the operator and its partners.

For boosting low pressure gas with high pressure gas, from a HP well or compressor output.

Contact Name	*
Company	*
Email	*
Tel	*
Fax	*
Application location/country	*
Estimated Installation Date	*
Brief Description of Application	*
Please quote the relevant production conditions (with appropriate units) for a free initial evaluation.
* denotes a required field, other fields are optional at this stage
A. High Pressure (HP) flow available at Wellcom System inlet. (Potential sources include HP Wells, Compressor discharge gas/recycled gas, Injection/Lift Gas, Export Gas, HP oil/water)
DATA UNITS 1. Source Name/Location * 2. Operating pressure * psig psia bara barg 3. Gas flow rate * MMscf/d Sm3/d 4. Liquid Flowrate (if any) per unit gas or per day * bbl/MMscf bbl/d m3/d 5. Gas specific constant or molecular weight     J/kgK 6. Operating temperature   Celsius Fahrenheit 7. Inlet Pipe inside diameter   inch mm 8. Specific heat ratio Cp/Cv     Cp/Cv 9. Sand Production, if any   lbs/1000bbl 10. Any other information
B. Low Pressure (LP) flow available at Wellcom inlet (Potential sources include LP Wells, Test/Production Separator gas, compressor suction, LP gas, flare gas)
1. Source Name/Location * 2. Operating pressure * psig psia barg bara 3. Gas flow rate * MMscf/d Sm3/d 4. Liquid Flowrate (if any) per unit gas or per day * bbl/MMscf bbl/d m3/d 5. Gas specific constant or molecular weight     J/kgK 6. Operating temperature   Celsius Fahrenheit 7. Inlet Pipe inside diameter   inch mm 8. Specific heat ratio Cp/Cv     Cp/Cv 9. Sand Production if any   lb/1000bbl kg/m³ 10. Any other information
C. Outlet ( exit flow conditions at Wellcom outlet)
1. Required discharge pressure * psig psia bara barg 2. Pipe inside diameter   inch mm
D. LP Well productions characteristics
1. Gas flow rate change per unit change in pressure MMscf/d/psi Sm3/d/bar   E. Design Information 1. Design Pressure   MMscf/d/psi psia psig 2. Materials of construction (pipe work, forgings, fittings)
F. Any other system details, well status, constraints, targets or comments: (Please send a basic sketch or process flow diagram, if possible)
Captcha * Please enter the letters and numbers you see displayed in the above image (What is a CAPTCHA?).